Personality Adapters
The ICE200 is supplied with five different personality adapters. Each adapter makes the pinout mapping for one or two AVR microcontrollers. All personality adapters are marked with part numbers and pinout to the devices they support. The ICE200 automatically detects which personality adapter is connected and initializes the AT90EM04 chip for the correct device.

Tip!
You can mount additional DIP sockets to the adapter to increase the space between the adapter and the target. However, the number of extra sockets should be kept to a minimum.

If you are utilizing surface mount device (SMD) versions of the supported AVR microcontrollers, you need to obtain an SMD adapter that converts from DIP to SOIC/TQFP/PLCC. There are a number of suppliers of this kind of adapters. However, a low cost alternative is to obtain the ICE200 SMD adapter kit. This kit contains special personality adapters for SMD versions of the AVR.
WARNING!
Do not change personality adapter without turning power of on both emulator and target.

The figure below shows the personality adapters for AT90S8535/4434.

See Also